Skip to main content
Recording schedules
C
Written by Curtis Hall
Updated over a week ago

We support two types of schedules. The first is a global schedule and the second is a per-camera schedule. Both are covered below

Global schedule

Select ‘Motion’ and then select all the grid locations (Assuming that you want motion detection 24×7×7).

Per-camera schedule

Under the Devices tab, select ‘Schedule’ under each camera that you want to enable a scheduled recording for

Select the checkbox for ‘Use device-specific schedule for this camera’ and select the type of recording schedule you want and click ‘Save changes’

Did this answer your question?